The following list indicates the product description web pages included in this site at the present time. New products are continually being developed. Thus, if the product of interest is not found here, contact Wyoming Test Fixtures, Inc. directly via telephone, fax, or e-mail for more information.

SECTION A:  SHEAR LOADING
A-1    Iosipescu Shear  (ASTM D 5379)
A-2    V-Notched Rail Shear  (ASTM D 7078)
A-3    Short Beam Shear  (ASTM D 2344)
A-4    Two-Rail Shear  (ASTM D 4255)
A-5    Three-Rail Shear  (ASTM D 4255)
A-6    Shear Strength by Punch Tool  (ASTM D 732)
A-7    Sandwich Panel Flatwise Shear (ASTM C 273)
A-8    Special Sandwich Panel Shear Fixture (ASTM C 273)

SECTION B:  COMPRESSION LOADING
B-1    Wyoming Combined Loading Compression (ASTM D 6641)
B-2    Modified ASTM D 695   (Boeing BSS 7260)
B-3    IITRI Compression  (ASTM D 3410)
B-4    Wyoming Modified IITRI
B-5    Wyoming Modified Celanese
B-6    Celanese  (formerly ASTM D 3410)
B-7    German Modified Celanese  (DIN 65 380)
B-8    Edgewise Compressive Strength  (ASTM C 364)
B-9    NASA Short Block Compression
B-10  Lockheed F-22 Test Fixtures
B-11  Compression Subpress  (ASTM D 695)
B-12  Compression Platens - Fixed and Spherical Seat

SECTION C:  SPECIALTY COMPRESSION TEST FIXTURES
C-1    Boeing Open-Hole Compression  (ASTM D 6484)
C-2    Northrop Open-Hole Compression  (NAI-1504C)
C-3    Boeing Compression After Impact  (ASTM D 7137)
C-4    NASA Compression After Impact  (NASA 1092)

SECTION D:  FLEXURAL LOADING Back to Top
D-1    Three & Four Point Flexure  (ASTM D 790,D 6272 and D 7264)
D-2    Long Beam Flexure  (C 393)
D-3    Fixed-Span Long Beam Flexure  (C 393)
D-4    Ceramic Flexural Strength  (ASTM C 1161)
D-5    Ceramic Equibiaxial Flexural Strength  (ASTM C 1499)

SECTION E:  TENSILE LOADING Back to Top
E-1    Standard Tensile Wedge Grips
E-2    Simple Tensile Wedge Grips
E-3    Tensile Wedge Grip Inserts
E-4    Specialized Tensile Testing Grips
E-5    Line Grips for Thin Sheeting
E-6    Split Capstan Grips
E-7    Briquet Tensile Grips
E-8    Split Collar Grips
E-9    Adhesive Bond Tensile Grips
E-10  Universal Joints
E-11  Adapters, Lock Rings, Pins

SECTION F:  SPECIALTY TENSILE TESTS Back to Top
F-1     Sandwich Panel Flatwise Tensile - 2" Blocks (ASTM C 297)
F-2     Sandwich Panel Flatwise Tensile - 1" Blocks (ASTM C 297)
F-3     Curved Beam Strength  (ASTM D 6415)
F-4     Split Disk Tensile  (ASTM D 2290)

SECTION G:  FRACTURE TOUGHNESS TESTS Back to Top
G-1    Mixed Mode Bending  (ASTM D 6671)
G-2    Tensile Clevises  (ASTM E 399)

SECTION H:  FASTENER RELATED TESTS Back to Top
H-1    Fastener Bearing Specimen Support (ASTM D 5961)
H-2    Laminate Bearing Strength – SACMA
H-3    Laminate Bearing Strength – ASTM D 5961
H-4    Plastic Bearing Strength – ASTM D 953
H-5    Fastener Double Shear  (MIL-STD-1312-13)
H-6    Three-Plate Shear  (Fed. Test 406, Method 1041)
H-7    Fastener Pull-Thru Strength  (MIL-STD-1312-8A)\

SECTION I:  BOND TESTS Back to Top
I-1      Climbing Drum Peel  (ASTM D 1781)
I-2      Roller Drum Peel  (ASTM D 3167)
I-3      NASA 90-Degree Peel
I-4      Block-Shear of Adhesive Bonds  (ASTM D 4501)
I-5      Lapped Block Shear of Adhesive Bonds  (ASTM D 905)
I-6      Weld Shear (ASTM A 497 & A 185)

SECTION J:  RUBBER TESTS Back to Top
J-1     Rubber Compression Set  (ASTM D 395)
J-2     Rubber Retraction  (ASTM D 1329)
J-3     Rubber O-Ring Test  (ASTM D 1414)

SECTION K:  SPECIMEN FABRICATION AIDS Back to Top
K-1    Specimen Routing Jigs
K-2    Specimen Tabbing Fixtures
K-3    Resin Casting Molds

Top of Page | Home Page | General Info | Company Profile | Contact Info

Wyoming Test Fixtures Inc. 2960 E. Millcreek Canyon Rd.
Salt Lake City, UT  84109
wyomingtestfixtures.com  Phone: 801-484-5055  Fax: 801-484-6008
E-mail: wtf@wyomingtestfixtures.com